KXUSBC2 Programmer
Connection Settings
Status:
Disconnected
Baud Rate:
115200
230400
460800
921600
Connect
Disconnect
Firmware Update
Load Firmware File
Select .hex or .bin file:
Program Firmware
EEPROM Configuration
Save Configuration
Reset to Defaults
Power Delivery
USB Role:
SRC (Source only)
SNK (Sink only)
DRP (Dual Role Port)
TRY_SRC (Prefer Source)
TRY_SNK (Prefer Sink)
PD Mode:
Off
PD 2.0
PD 3.0
Charging Limits
Charging Current Limit (mA):
Charging Voltage Limit (mV):
Input/Output Current Limits
DC Input Current Limit (mA):
OTG Current Limit (mA):
OTG & Discharging
Discharging Voltage Limit (mV):
OTG Voltage Headroom (mV):
Features
Allow charging while rig is on
Enable thermistor (temperature monitoring)
RTC Calibration
User RTC Offset (ppm):
Operation Log
Clear Log